floor stripper rental


floor-stripper-rental floor stripper rental

floor stripper rental – Stone floors are really popular, and they have been for several years. The vast range of colours and colors, the durability, practicality and comparative ease of upkeep, and their abundance in nature has made them a continuing selection of flooring material down the centuries. Below are the most frequent mistakes people make when caring for their floors.

1. Lack of Allergic

The number 1 enemy of all floors, not only rock, is self explanatory. If I used to shoot two diamonds (the hardest known natural material) and rub them against each other, guess what, they will possibly wear. Every-day grit, carried in on shoes can contain all kinds of minerals such as quartz. The solution would be to remove grit, any way you can and among the best ways would be to place a dust-collecting mat outside the door. Should you add another only inside you are giving your floor a much better chance of avoiding harmful grit.

2. Walking on your Stone Floor with Out-Door Shoes

This is associated with the first point naturally. If you’ve got a fancy polished wood floor, or a costly rug, I bet you take off your shoes perfect? All of us tend to instinctively know how to be mindful on other floors materials and deal with them with the respect they deserve. Well rock is not any different, it needs love and esteem also. Take your shoes off and put your slippers on, that way you cannot carry harmful grit on the ground.

3. Over-Mopping

Some folk just seem to want to wash their floor to departure. The more you wash with powerful detergents and do not rinse efficiently, (see point #6), the more possibility of leaving residues that produce the floor look dull and dead. Most often, all that’s needed is a few regular dry sweeping or cleaning, using a gentle brush or micro-fibre floor duster and/or vacuuming. This may also help keep grit off the ground.

4. Not attending to Spills and Accidents right away

Somehow, we tend to treat hard rock floors differently to say carpet or wood. If, as an instance, we have a very expensive carpet and we spill something about it, like a glass of wine for instance, would we sit and see it become a blot? I really don’t think so. Even if this rug has any sort of stain protection on it, we all know that it will only buy us a few ‘time to respond’, thus we rush off into the kitchen for those towels.

Well guess what, supplying ‘reaction time’ is all sealers do for gems. Just enjoy the carpet, if we spill something we ought to absorb it up straight away, especially if it is something such as wine or any other liquid liquid. We do not trickle ‘stains’ we trickle contaminants, so it is when we leave the contaminant for a length of time to permeate the rock, that they become stains. If the floor is sealed using a good sealer, we just get a bit more reaction time. Many stains could be prevented by taking care of spills and injuries as the occur.

5. Wrong choice of cleaner for regular cleaning

However, the majority of them are powerful de-greasers, high ph cleaners meant to deep clean very grubby floors. Furthermore, there is a natural human tendency to ignore directions and make it extra powerful, if it says add one capful a bucket, just how a lot of us have added another one just for fortune? There are reasons for these directions and dilution rates but much more important, there is absolutely no need to use such chemicals for every day or weekly cleanup.

After the floor does need a fast wash (and when we be aware of the first 4 points then this might not need to be too often) no issue, we just must make sure that you use a neutral cleaner, that’s one with a ph value of around 7 to 8. There are plenty of them out there, all designed to wash gently without a harmful effect on the ground or onto any sealer or finish that may be applied.

6. Just carrying on using the Exact Same old routine

Every now and then, the floor needs a little intensive care. From the company we call this a ‘Periodic Deep-Clean’ – From time to time the floor will need a deeper, more labour-intensive clean. This is the opportunity to utilize those high alkaline cleaners. But, try to use one that was created for stone instead of simply reaching for the cheapest supermarket brand (we’re just doing this once or twice a year so no need to penny-pinch).

The key word here is dwell time – those cleaners will need to be left on the ground for a time period – 5 to 15 minutes typically. The biggest mistake people make here would be to just wash the floor using the large ph detergent. Ignore dwell time and you waste your own time and effort. The cleansers need time to get the job done. Then they ought to be agitated, or scrubbed, remember we aren’t doing so every week, only a couple of times a year so we are able to manage the opportunity to do it properly. Notice, this type of cleaner might have an effect on any sealer used, so check first; you might want to top the dyes up afterwords. This brings us on the biggest mistake of most(it is also the easiest one to fix).

7. Not Rinsing the ground after washing

This is one of the most important, yet most overlooked aspects of floor cleaning. It does not matter how much effort we put to cleanup, nor how powerful the cleaning-chemical, if we leave dirty water lying on the ground, as it dries, we’ll have residues. Think about what we have only achieved: we place a solid chemical on the ground; we allow it to sit (dwell time) so it’s started to break down the ingrained dirt; we scrubbed – to loosen more dirt and allow the cleaner to penetrate deeper.

Then what tends to happen is we push all this around with a mop, occasionally rinse the mop in water that by today has long since ceased being fresh or clean, and we place the sole partly washed mop, back on the ground to spread more grungy water around. Sure, a few of the dirt is transferred to the mop bucket, however, plenty gets left behind. In addition to the dirt (a few of which is now broken down and nicer, so it can get deeper to the ground, especially the grout joints) we also leave behind detergent residue. This combination of residue and partly emulsified dirt rapidly builds up to leave a dull patina on the rock and is among the chief reasons grout lines go dark and grubby so quickly.

The remedy is simple, after washing the ground, go change the dirty water that includes the detergent, then rinse out the bucket along with the mop and fill the bucket with fresh, clean water. Now, go over the ground again with only that wash water. When it is a big floor, you might need to modify the wash water again, perhaps more than once – but do it as it’ll save you time in the long term.

8. Leaving the ground wet

Have you discovered what happens to glass windows after washing if they’re only left to dry naturally? Many rock floors are eloquent or even polished and as a result they could behave in the exact same manner as glass. Therefore, after rinsing the ground, it is very good practice to dry the floor down using an absorbent cotton towel or a micro-fiber cloth. Buffing floors dry just like this (either by hand or using a machine, depending upon how big your floor) will remove the residual moisture (and any stray smudges that might have been overlooked).


If we do not respond fast enough to spills (error #4) we could wind up getting a blot. If we continually ignore that blot, and another one and so on, pretty soon the floor is able to look deeply ingrained and generally grubby. For isolated little stains try a localized poultice stain remover.


When an acid sensitive rock floor, such as polished marble is subjected to an acidic contaminant, such as red wine, the result is often either a blot (the reddish colour) and also an etch mark. An etch-mark is what happens when something acidic erodes off the fine polished surface of [typically] calcium-based stone. It’s often confused with a blot as it is so often accompanied by you. The acid basically burns fresh holes in the rock, those holes weren’t there before, so no sealer might have got into them, Also, most polished floors use impregnating sealers which work beneath the surface and thus provide no defense against acids in the surface itself.

The way to spot an etch mark would be to wash the ‘blot’ (deep wash or poultice like) then after rinsing and allowing the ground to dry check where the blot was. If the stain has now gone, but in its place is a dull spot often with a more demanding feel (compared to the polished surface) and a whiter or bleached (less colour anyway) appearance, then this really is an etch-mark. If we now ignore this harm (since that’s what it is, bodily harm to the rock surface) then it may leave the rock more vulnerable to staining (the surface is now more textured so it is going to tend to hold dirt more readily, it is also less dense, and so potentially more absorbent and any sealer will have been compromised). Small and localized etching can be immediately repaired with a hand applied re-polishing lotion, bigger scale etching will likely require the services of a rock floor specialist.


We’ve got all heard family elders, and TV experts rave about old home made remedies for cleaning. Please, do not hear them, period. The reason why I take such a strong stance about this is that I have observed the results. The fantastic, versatile abilities of household goods such as vinegar and lemon juice are forever being indicated for all manor of cleaning, and yes they could get the job done. They operate by virtue of being acidic and will break down quite a few minerals (lime scale on tiles as an instance).

The issue is that they kill the face of calcium-based along with other acid sensitive stones (marble, limestone, travertine to mention but a few). Not only have you ever noticed entire floors destroyed, but the surface completely piled, but in addition they stain the ground. After performing this as great job of removing the polish, then they add their particular colour or colour into the now much more porous floor.

12. Neglecting the Seal

Do not assume that just because your rock floor was sealed during installation, that it still has an effective seal set up two years on. It might have, but throughout this time, the floor will have had a fair bit of visitors and it’s most probably been exposed to a number of cleaning chemicals. It’s advisable to inspect the integrity of the sealer occasionally. To get a coat type sealer I would suggest checking about every 6 to 12 months, for an impregnator every 12 to 24 months.

The means to do it is to drop some water on the ground and leave it for say 10 minutes. If it goes in quickly and darkens the rock, then when wiped away it leaves a wet patch, then it would be advisable to top up the sealer. If the water does not go into the rock except for an feint surface shadow, it is most likely fine for now.

Leave a reply "floor stripper rental"